Configuration
Posted Updated 
We use ser2net to enable a connection to the internal serial interfaces of the Zwave and ZigBee controllers via TCP.
By sl4shgw 1 min read
Making a “dump” wifi access point
For an easy start, the NA502(s) gateway operated with OpenWrt can be set up as a wireless access point (AP). This assumes that the Sercomm Gateway does not need to provide any routing, DHCP or DNS services.
A detailed description can be found at: Wireless Access Point (aka “Dumb” Access Point)
The easiest way is really to configure the wireless AP to get its address from the main router via DHCP, even though the guide focuses on how to do it with a static IP address.
Loading additional OpenWrt packages
ser2net: Telnet/tcp connections to serial interfaces
LuCI - Web interface support for ser2net
This post is licensed under CC BY 4.0 by the author.